RotoCoat 2H
Automatic Inner Rotational Lining Equipment for Fire Extinguisher Cylinders for lining cylinders with EN3 approved Corrosion Resistant Thermoplastic Coating powders.
RotoCoat 2H has been designed to apply a thermoplastic protective lining, to carbon steel fire extinguisher cylinders. The equipment is supplied ready for use and only requires connection to the mains services on site.
General Description
The machine consists of a sturdy fabricated steel structure mounted on 4 adjustable levelling feet. The machine main rotation beam on which the machine body is installed is mounted on two bearings fixed to each side of the support frame, allowing machine body rotation up to 180°. The fire-extinguisher cylinders are mounted on supports and fixed to said supports with special adaptors. These supports rotate around their axis to allow cylinder rotation. Cylinder rotation ensures homogeneous cylinder surface heating and, during the lining phase, allows even powder distribution inside the cylinders. Powder transfer is ensured via two powder containers which must be manually installed (with special quick releases) on the machine body on the opposite side to the cylinders before starting the cycle.
Pre-heating and powder melting is carried out by means of two burner systems installed on the rear part of the machine body. Burner Systems: each burner system consists of one main side burner, one top burner and one bottom burner. The position of the burners can be changed according to the type of cylinder to coat, thus
