Click for more info and reviews of this Fulton Trailer Bearings Races Seals Caps:
[ Ссылка ]
Check out some similar Trailer Bearings Races Seals Caps options:
[ Ссылка ]

[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]

Full transcript: [ Ссылка ]
Today we're going to take a look at the Fulton drive-in grease cap with the 2.333 outer diameter. This grease cap will tap onto the end of your hub on your axle. It protects your wheel bearings from any dirt or debris getting in there that would destroy your bearings. It's a 16-gauge steel construction. It has a nice corrosion resistant zinc plating over the whole cap. Again, this grease cap is designed to fit in trailer hubs with the 2.333 inner diameter. It is a drive-in installation.

You can see right here the flange portion you put onto the hub, and then tap it in until it seats against the ridge of the cap right there. This is for a quantity of one. A few dimensions on this - the flange diameter, which is measured edge-to-edge, is going to be right at 2.333 inches. The flange length, which is this portion that would go into the hub, is going to be right at 0.37 inches, and then the overall height from the very bottom to the top of the dome is going to be right at 1.28 inches. That should do it for the review on the Fulton drive-in grease cap with the 2.333 outer diameter.

свернуть