How to install a Toilet Fill Valve by Korky

Hello and Welcome to Korky Toilet Repair. Today we are going to install your new Korky QuietFill Fill Valve. The first step is to shut off your water supply to your toilet. Then hold the lever down to drain the water from your tank. Sponge out the remaining water in your toilet tank. Place a bucket underneath your toilet tank to catch any excess water. Disconnect your water supply line and remove the mounting nut. Remove the old fill valve. Turn the top of your new fill valve counter clockwise and pull up to fully extend.
Place the valve in the tank and press down on the fill valve until the corner of the white cover lines up with the top of the flush valve. Lock the fill valve in place by twisting the upper half clockwise. Make sure the rib on the top of the valve lines up with the pegs on the bottom half. Attach the refill tube to your new fill valve. Make sure the refill tube has a direct path to the flush valve. When your fill valve is set, screw on the mounting nut until hand tight. Push the refill tube towards the front of the tank to ensure the port is locked in place. Insert the metal clip into the refill tube and attach the clip to the flush valve. Reattach the water supply line. Turn on the water supply line to finish your installation.
Congratulations, You have successfully installed your new Korky QuietFill Fill Valve. Thank you for choosing Korky. If you have any questions or need further assistance with your installation, please visit our website or call us at 1 800 528 3553.

свернуть