Ultrasonic welding of logistics plastic seals
Ultrasonic welding of logistics plastic seals is a commonly used method for packaging and fixing logistics packaging, which utilizes the high-frequency vibration of ultrasound to generate heat and achieve the welding of seals.
The following are the steps for ultrasonic welding of logistics plastic seals:
Preparation: Select suitable plastic seals and ensure that they are of good quality and free from damage or breakage. At the same time, check the status of the ultrasonic welding equipment to ensure normal operation.
Adjusting parameters: Adjust the parameters of the ultrasonic welding machine, such as amplitude, pressure, and time, based on the type and thickness of plastic seals used. These parameters will affect the effectiveness and quality of welding.
Place the plastic seal in the position where it needs to be welded, ensuring that both ends of the seal are aligned and free from wrinkles.
Using an ultrasonic welding machine: Gently press the welding head over the seal to make it in close contact with the seal.
Start welding: Turn on the ultrasonic welding machine and generate heat by generating high-frequency vibrations. This heat will cause the seal to melt under the action of the welding joint.
Complete welding: After welding for a certain period of time, turn off the ultrasonic welding machine. Wait for a moment until the seal cools and solidifies again.
Check welding quality: Check the quality and tightness of the welding area. Ensure that the welding is firm and there are no air leaks or looseness.
It should be noted that during ultrasonic welding, care should be taken to avoid touching the welding head or other hot surfaces to avoid burns. In addition, depending on the type and thickness of plastic seals used, it may be necessary to adjust the parameters of the ultrasonic welding machine to achieve the best welding effect.
These are the general steps for ultrasonic welding of logistics plastic seals, and the specific operations may vary depending on different equipment and materials. Therefore, before conducting actual operations, it is best to refer to the instructions of the equipment used and ensure that the operation is carried out in the correct way.
Whatsapp:08615006191865
Company：Wuxi Qijiang Precision Machinery Co.,Ltd
Email:zsvihj2019@gmail.com
Http://www.qjmachinery.com.cn/en/

свернуть