In this video you will find helpful information/instructions and tips on how to change fuel injectors and seals on a 3.0 TDI found in the Audi A4, A5, A6, A7 and Q5 with engine codes: CDUC or CDUD.
Please let me know if you have any questions in the comment section below.
You can really help the future success of my channel by clicking the link below to subscribe, it's free and I will greatly appreciate it!
[ Ссылка ]
Torque settings:
High pressure pipes: 25 NM
Clamp stretch bolts: 6 NM + 90 degrees
Tools required:
M8 spline bit
Torque wrench
1/4" socket set with 7mm socket
T30 torx bit
17mm spanner
Small flat head screwdriver
Solvent cleaner
Links for kit needed:
Injector puller slide hammer:
[ Ссылка ]
[ Ссылка ]
Wire brush set:
[ Ссылка ]
[ Ссылка ]
Bolt and seal kit:
[ Ссылка ]
For VAG group vehicle (Seat, Skoda, VW, Audi) diagnostic services, coding and adaptations in the Northamptonshire area, contact me on the email below:
ryanbosworth.rb@gmail.com
Support my channel:
[ Ссылка ]
Safety disclaimer: Ryans workshop is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information.
The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury.
Ryans workshop strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
