Common issues for Y Main TV Blink Code, Lines on screen. & How to replace a Y main board
Click Here to BUY TV PARTS: [ Ссылка ]

Find Samsung BN96-09744A Replacement Y-Main Boards at ShopJimmy.com:
[ Ссылка ]
• 180-Day Warranty on all Replacement TV Parts!*
• FREE Technical Support Tips! Call (877) 881-6492

*Some exclusions may apply

[ Ссылка ]
[ Ссылка ]
.....................................................................................................

The Y-Main Board shown in this video is a replacement for the following Plasma TV models:

Plasma TV Model Numbers:
• INSIGNIA NS-P502Q-10A
• SAMSUNG PN50A510P3FXZA
• SAMSUNG PN50A530S2FXZA
• SAMSUNG PN50A550S1FXZA
• SAMSUNG PN50A650T1FXZA
• SAMSUNG PN50B530S2FXZA
• SAMSUNG PN50B540S3FXZA
• SAMSUNG PN50B550T2FXZA
• SAMSUNG PN50B560T5FXZA
• SAMSUNG PN50B650S1FXZA
• SAMSUNG PN50C430A1DXZA
• SAMSUNG PS50B530S2W
• SAMSUNG PS50B530S2WXXU
• SAMSUNG PS50B551T3WXXU

Top Common Plasma TV problems for bad Y-Main Boards:
• Lines on TV Screen,
• TV Stuck in Test Pattern Mode,
• Partial Picture on PDP,
• No Power, TV Cycles Off,
• TV Powers On When SN Board Is Disconnected From Power Supply
• TV Blink Code, Power Light Flashing

.....................................................................................................

TV Repair Made Easy™
© 2013 ShopJimmy.com, LLC.

.....................................................................................................

Disclaimer:
WARNING! Please make sure that your TV is unplugged, and that you are protected from static electricity. There are various ways to eliminate static electricity, but the most common way is to use a grounding wrist strap. Take photos and notes often to help remember the location and orientation of the parts and wires. And feel free to pause and backtrack through this tutorial as much as needed.

Materials Needed:
To be best prepared to replace the Y-Main Board inside of your TV, you will need the following materials:
• A pair of latex gloves.
• Your ShopJimmy.com replacement Y-Main Board.
• A pair of needle-nose pliers.
• Both a flat-head and phillips screwdriver.
• And a cup to hold all screws, clips, and any other small items. So let's get to it shall we?

Instructions:
• Locate your TVs identification label and take note of the brand name model number, serial number and model code if present.
• Unscrew and remove the back cover.
• The Y-Sustain or YSUS board is located on the left side of the chassis. The YSUS Board connects to the PDP assembly through a buffer system most commonly called a Y-Buffer or a Scan Drive. This buffer system can be comprised of one or two boards or can be built directly into the Y-Sustain. Some manufacturers suggest replacing the Y-Sustain board and all Y-Buffers, as it can be difficult to pinpoint faulty boards.
• Carefully unplug all wires and ribbon cables by hand.
• Unlock the wire connectors by squeezing the tab or tabs and gently remove the wires. Be sure to keep a firm grip with both hands.
• Using your finger flip up the tab on the ribbon connector and gently remove the ribbon. Please do not use a screw driver to open ribbon connectors as it can cause damage to the pins.
• Unscrew and remove your bad Y-Main Board from the chassis.
• A partial part number for this item can be found printed on the barcode label.
• Search your partial part number on [ Ссылка ] to find a compatible replacement.
• Filter your search results by the appropiate part type.
• Click on the search results to view important product specifications. Verify that your original board matches all requirements noted in the product description prior to purchase.
• Insert all screws to secure your ShopJimmy New Y-Main Board to the chassis.
• Reconnect all cable and ribbon connections.
• Gently guide the ribbon back into the connector, match the line printed on the ribbon cable with the edge of the connector, and close the tab on top.
• Return the back cover to its original position and secure all screws.
• This ShopJimmy replacement Y-Main Board does not require any manual configurations in order to function. Simply plug in and power on and your TV will function as if new.

Thank you for watching one of many tutorials here at ShopJimmy.com! If you have any further questions regarding your repair, simply post a question in the comments section below, or call our award-winning customer service team at the number on your screen! We strive to learn and share new TV Repair Tips everyday.

свернуть