How to change rear brake pads / brake pad set on VOLKSWAGEN TOURAN 1 (1T3) 1.6 MPV 05.2010–05.2015 [TUTORIAL AUTODOC]
Brake pads on VW Beetle (5C) (04.2011–present) / VW Caddy III (2K, 2C) (04.2004–05.2015) / VW Eos (1F) (03.2006–08.2015) / VW GOLF V (1K) (10.2003–02.2009) / VW PASSAT B6 (3C) (08.2005–10.2011) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AUTODOC — [ Ссылка ]
⚡ AUTODOC CLUB — [ Ссылка ]
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals — [ Ссылка ]
All video and PDF tutorials on VOLKSWAGEN TOURAN (1T3) parts changement: download and watch at AUTODOC CLUB – [ Ссылка ]
❱❱ Install the AUTODOC CLUB — [ Ссылка ]
🛒 On our website you will find a wide range of auto parts you are interested in: [ Ссылка ]
Brake pads: [ Ссылка ]
Brake pads for VOLKSWAGEN TOURAN (1T3): [ Ссылка ]
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ [ Ссылка ]
00:00 — How to change rear brake pads / brake pad set on VW TOURAN 1t3
00:25 — Unscrew the brake fluid reservoir cap.
00:34 — Unscrew the wheel bolts. Use wheel impact socket #17.
00:40 — Raise the rear of the car and secure on supports.
00:44 — Disconnect the ABS sensor electric socket. Disconnect the brake pad wear sensor plug.
00:54 — Spread the brake pads. Use a crowbar.
01:17 — Remove the brake caliper.
01:33 — Remove the brake pads.
02:04 — Press in the brake caliper piston. Use brake caliper wind back tool.
02:38 — Treat the back side of the new brake pads. Use anti-squeal paste.
03:06 — Install new brake pads.
03:24 — Install the brake caliper and fix it. Use a combination spanner #12. Use a combination spanner #19.
03:36 — Tighten the guide pins. Use a torque wrench. Tighten it to 30 Nm torque.
03:47 — Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
03:51 — Screw in the wheel bolts. Use wheel impact socket #17.
04:19 — Tighten the brake fluid reservoir cap.
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► VW car repair tutorial — [ Ссылка ]
► VW TOURAN 1T3 car repair tutorial — [ Ссылка ]
► How to change headlight bulb on VW TOURAN 1t3 — [ Ссылка ]&
► How to change oil filter and engine oil on VW TOURAN 1t3 — [ Ссылка ]&
Mobile shop: [ Ссылка ]
📢 AUTODOC on social media:
Instagram: [ Ссылка ]
Facebook: [ Ссылка ]
Twitter: [ Ссылка ]
YouTube: [ Ссылка ]
TikTok: [ Ссылка ]
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
