[ Ссылка ] presents the official Asus ZenFone 2 Screen Repair, Teardown and Reassemble Guide. This step-by-step repair video will show you how to replace a broken or damaged ZenFone 2 display assembly, and also how to completely teardown and reassemble your Asus phone. Visit Fixez.com for all of the DIY Asus ZenFone 2 replacement screens, parts and tools you need to quickly, and affordably, fix your device! [ Ссылка ]

If you need your ZenFone 2 repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your Asus smartphone for you. They are available Monday to Friday, 9am to 5pm PST.

Subscribe to our YouTube Channel for additional DIY smartphone and tablet teardown and repair videos! [ Ссылка ]
Like us on Facebook: [ Ссылка ]
Follow us on Twitter: [ Ссылка ]

Asus ZenFone 2 Screen Repair, Teardown and Reassemble Guide Video Transcription:

Warning:

You are performing this repair at your own risk
We claim no responsibility for any damages that might occur

The DIY Asus ZenFone 2 repair tools used in this video can be found here: [ Ссылка ]

Step 1

Power down your Asus ZenFone 2.

Step 2 (Asus ZenFone 2 Rear Battery Cover)

Use the plastic triangle opening tool, or your fingernails, to work around the ZenFone 2 rear cover and release the plastic clips securing it in place.

Step 3 (Asus ZenFone 2 Exterior Midframe)

Remove the following 14 Phillips screws.

Easily separate the exterior midframe from the Asus phone.

Step 4 (Asus ZenFone 2 Battery, Loudspeaker, and Dual-SIM and microSD Card Slots)

Disconnect the ZenFone 2 battery from the motherboard.

Use the spudger to pry up the loudspeaker.

Detach the interconnect cable from the motherboard.

Remove the Kapton tape, and detach the interconnect cable from the daughterboard.

Locate the peel-to-remove adhesive tab at the top of the battery. Grab the tab and try to keep the adhesive strip flat and wide. Slowly pull the strip up and away from the Asus ZenFone 2. The strip will stretch to many times the length of the battery- keep pulling until it comes out from between the battery and the midframe.

And just like that, out comes the 3000 milliampere-hour (mAh) Asus ZenFone 2 battery.

The ZenFone 2 battery is strongly adhered to a protective metal cover, but with a little spudgering it is readily freed.

Step 5 (Asus ZenFone 2 Motherboard)

Peel up the copper tape and then pop off the metal shield.

Disconnect the display cables and signal cable.

With the spudger in hand, pry up and remove the ZenFone 2 motherboard.

Step 6 (Asus ZenFone 2 Rear-Facing Camera and Front-Facing Camera)

Release the ZIF connector and remove the 13-megapixel Asus ZenFone 2 rear-facing camera.

Extract the 5-megapixel ZenFone 2 front-facing camera from the motherboard.

Step 7 (Asus ZenFone 2 Earpiece Speaker, Vibrator, and Daughterboard)

Pluck out the spring-contact-connected ZenFone 2 earpiece speaker.

Use the tweezers to detach and extricate the vibrator from the chassis.

Lift out the daughterboard. It includes the ZenFone 2’s micro-USB port and headphone jack.

Step 8 (Asus ZenFone 2 Display Assembly)

Peel up the display cable from the ZenFone 2 midframe.

Begin to free the Asus ZenFone 2 display assembly by using the heat gun to warm up the adhesive.

With the precision knife create enough space to insert a playing card.

Use a combination of playing cards and a triangle opening tool to attack the adhesive. Take your time and apply additional heat as needed.

Once you have sliced through the adhesive, be mindful of the display cable when decoupling the ZenFone 2 screen from the midframe.


* To reassemble your device, follow the steps in reverse order.

свернуть