Buy Now!
New Control Arm Bushing Set from 1AAuto.com [ Ссылка ]
New Control Arm Bushing from 1AAuto.com [ Ссылка ]

This video shows you how to install a front lower forward control arm bushing on your 2007-2012 Nissan Altima. Rubber bushings help smooth out a ride, but are susceptible to wear or drying out and crumbling over time. This bushing is replaceable separate from the control arm, and you can replace it yourself.

This repair was done on a 2008 Nissan Altima S 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima

Tools you will need:
• Pry Bar [ Ссылка ]
• 18mm Wrench
• 21mm wrench
• 18mm Socket
• 21mm Socket
• 32mm Socket [ Ссылка ]
• Press
• Pliers
• 1/2 Inch Impact Gun [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Large Hammer
• Pick [ Ссылка ]
• Punch
• Small Hook

Subscribe: [ Ссылка ]

Check out our playlist:
Nissan Altima 2007-2012 4th Gen: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть