1× X Carriage
4× Bearing Bracket
1× Extruder holder
2× Linear Bearing LM8LUU
1× Belt bracket
10× M3x6mm screw
2× M4x6mm screw
2× M3 nut

Step1.fix the 4 Bearing Brackets on the back of the X Carriage loosly with M3x6mm screws. Insert the linear bearing into the slot and screw the bracket tightly.
Please notice the front and back of the plate.
Step2.fix the belt mount on the back of the carriage with 2 M3x 6mm screws and M3 hex nuts.
Step3. Fix the extruder holder on the front side of the X carriage using M4x6mm screws.

You can click following link to visit the wiki of building instructions of Geeetech Prusa I3 M201 [ Ссылка ]

We would like to sincerely invite you to join our geeetech 3D printer user club.
Here you can get the most professional and just-in-time technical support about your printer. Share anything about your geeetech 3d printer.
[ Ссылка ]

свернуть