Mazda made some big improvements to the quality of the 4th GEN Mazda3 and one area that stands out, in particular, is the improvements to road noise. This is fantastic when cruising on the highway, but there’s one area that is just too quiet: exhaust. Luckily we have just the fix with the CorkSport Axle-Back Exhaust for 2019+ Mazda 3 & CX-30. Add some needed excitement to your Mazda 3 by adding some character to your exhaust note. Loud enough to enjoy during aggressive driving, but quiet for cruising and the daily commute. Check out the video for sound clips and read on for full details!

𝗚𝗲𝘁 𝘁𝗵𝗲 𝗔𝘅𝗹𝗲 𝗕𝗮𝗰𝗸 𝗘𝘅𝗵𝗮𝘂𝘀𝘁:
[ Ссылка ]

𝙋𝙚𝙧𝙛𝙤𝙧𝙢𝙖𝙣𝙘𝙚 𝙎𝙤𝙪𝙣𝙙:
The CorkSport ABE replaces the restrictive OEM muffler section with a high-flow, pass-thru resonator that provides volume when you want it, but minimizes drone and excess noise when cruising. The GEN4 Mazda 3 axle back is an atypical design with an offset inlet flange. This led us to use a single, long resonator on one side. We even tested different resonator combinations and found the single resonator to be the best combination of great tone plus drone elimination. Be sure to check out the product video for sound clips!

𝗔𝗽𝗽𝗲𝗮𝗿𝗮𝗻𝗰𝗲 𝗕𝗼𝗼𝘀𝘁:
We did not forget about appearance. The rear end of the 4th Gens are let down by the too-small OEM exhaust tips. We increased their size up to 90mm to fill out the bumper cutouts. The CorkSport Exhaust uses a dual wall, slant cut design that is rotated to help match the curve of the OEM bumper. As a finishing touch, a laser engraved CorkSport name badges are added to really set off the look.

𝙈𝙤𝙙𝙚𝙡 𝙎𝙥𝙚𝙘𝙞𝙛𝙞𝙘 𝘿𝙚𝙨𝙞𝙜𝙣:
We specifically designed two different length tips for the Mazda 3 Hatchback due to the design of the Mazda Appearance Package. The rear bumper skirt adds a lot of length to the car…hiding the tips from view. With the Appearance Package specific design, the tips are prominent in the rear bumper skirt as they should be. (The Hatchback Appearance Package tips are 45mm longer than standard Hatchback tips).

𝙈𝙖𝙩𝙚𝙧𝙞𝙖𝙡𝙨 & 𝙈𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜:
Each CorkSport ABE is made from fully polished, mandrel bent, 304 stainless steel. This gives a great look that will stand up to the test of time. To ensure strength, each joint is TIG welded and the inlet flange is laser cut for optimum fitment. Each exhaust comes with all hardware needed for installation and we even provide full color installation instructions!

𝗚𝗲𝘁 𝘁𝗵𝗲 𝗯𝗲𝘀𝘁 𝗶𝗻 𝗠𝗮𝘇𝗱𝗮 𝗮𝗳𝘁𝗲𝗿𝗺𝗮𝗿𝗸𝗲𝘁 𝗽𝗮𝗿𝘁𝘀 𝗮𝘁 𝗼𝘂𝗿 𝘀𝘁𝗼𝗿𝗲: [ Ссылка ]
𝗖𝗼𝗻𝘁𝗮𝗰𝘁 𝗦𝘂𝗽𝗽𝗼𝗿𝘁:
Phone 360-260-2675
𝗙𝗼𝗹𝗹𝗼𝘄 𝘂𝘀 𝗼𝗻
𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 [ Ссылка ]
𝗜𝗻𝘀𝘁𝗮𝗴𝗿𝗮𝗺 [ Ссылка ]
𝗧𝘄𝗶𝘁𝘁𝗲𝗿 [ Ссылка ]
𝗧𝗶𝗸𝗧𝗼𝗸 [ Ссылка ]

свернуть