In this video, we are replacing the *old* Victron Orion 12|12 30A with the *NEW* Orion XS 12|12 50A in our Installers' Transit Camper Van! Visit shop.explorist.life to purchase both the Orion XS and Orion XS DC DC Charger Retrofit Wiring Kit!

This particular video features how to upgrade a 30A Orion to the new 50a Orion XS; but the concepts on how to install this unit in a new system are still relavent.

We have also made 4 different wiring kits surrounding this new Orion XS that will allow for installation in nearly any application:

*A 'from scratch' installation using the new Orion XS:* [ Ссылка ]

*A 'from scratch' installation using 2x Orion XS's for 'twice as fast' charging:* [ Ссылка ]

*An Installation upgrading from a 30A Orion to the new 50a Orion XS (Most popular):* [ Ссылка ]

*An installation upgrading dual 30A Orions to dual 50A Orion XSs:* [ Ссылка ]

And as far as the actual Orion XS DC DC Unit; If you've already ordered from us; those will be in early this upcoming week. If you HAVEN'T ordered yours yet; we will have about 15 extra ones unspoken for you can grab from here: [ Ссылка ]


*➤ Join the EXPLORIST.life Academy:* [ Ссылка ]
*➤ Shop the EXPLORIST.life Store:* [ Ссылка ]
*➤ Shop Batteries: Use Code 'explorist' at checkout for $50 off per battery:* [ Ссылка ]


Here are some additional resources that you may find helpful with planning and installing your DIY Camper:

FULL ELECTRICAL INSTALLS:

➤50A 5th Wheel RV - Full Electrical Upgrade: [ Ссылка ]

➤30A Class C Motorhome - Full Electrical Upgrade: [ Ссылка ]

➤ 30A Travel Trailer - Full Electrical Upgrade: [ Ссылка ]

➤ Truck Camper - Full Electrical Upgrade: [ Ссылка ]

➤ Ford Transit Camper Van Electrical Install: [ Ссылка ]

➤ DIY Sprinter Camper Van Electrical Install - Full Tutorial: [ Ссылка ]

➤ Binge the Transit Van Build: [ Ссылка ]
00:00 Introduction
00:35 Disconnect from Power
00:54 Disconnect Wires
01:05 Remove Old Orion
01:15 Attach Orion XS 12/12 50A To Wall
01:25 Install Junction Stud
01:35 Replace Ferrules with Lugs on Negative Wires
01:51 Make Jumper Wire
02:02 Connect Negative Wires to Junction Stud
02:14 Remove Strain Relief Cover
02:24 Loosen Terminals and Connect Wires
02:53 Replace Strain Relief Cover
03:03 Connect to Cerbo GX
03:18 Turn Power Back On to the System
03:29 Program Orion XS
03:43 Turn on Engine to Test
04:45 Cerbo GX Update Coming Soon
05:55 Final Thoughts

свернуть