Homemade ski or snowboard stand/vise for waxing and tuning. This can be easily be made at home in about 20 minutes with a saw, hammer and screw gun. Material list below. Enjoy!
Dimensions:
48" wide (end to end) x 10" deep (front to back) x 10" tall
Center Slot for vertical ski holder is: 3/4" wide x 2.5" Deep
Materials (with affiliate links):
2 Carabiners with Locking Cams and 4' of Para-cord: [ Ссылка ]
8' Pine 2"x10" Board - Local Home Improvement Store
Bike Tube - [ Ссылка ]
Drywall Nails or Staples (To tack on Inner-tube)- [ Ссылка ]
Box of 2.5" Wood Screws: [ Ссылка ]
2 I-Screws: [ Ссылка ]
Total Material Cost: About $40
Camera: [ Ссылка ]
Lens: [ Ссылка ]
