Buy Now!
New Brake Rotor Set from 1AAuto.com [ Ссылка ]
New Brake Pads from 1AAuto.com [ Ссылка ]
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2006-2012 Toyota RAV4.
• Check here for more videos on the 2006-12 Toyota RAV4: [ Ссылка ]
This repair was done on a 2010 Toyota Rav4 Base 2.5L and the process should be similar on the following vehicles:
2006 Toyota Rav4
2007 Toyota Rav4
2008 Toyota Rav4
2009 Toyota Rav4
2010 Toyota Rav4
2011 Toyota Rav4
2012 Toyota Rav4
Tools you will need:
• 14mm Wrench [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 21mm Socket
• Brake Caliper Hanger [ Ссылка ]
• 3/8 Inch Impact Gun
• Ratchet [ Ссылка ]
• Socket Driver
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• Brake Grease
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Wheel Chocks
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Toyota RAV4 2006-12 3rd Gen: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
