🚩Alfa Mito Qv limited edition - 352hp
STOCK engine 🚩
This beautiful and rare Alfa Mito Qv 101 limited edition came to us for tuning and asked for a powerful setup with stock engine.
Currently it is the most powerful 1.4 multiair with stock engine
Specs :
⚙️ Garrett gtx2860 gen2 turbocharger
⚙️ Custom camshaft by MTD
⚙️ Custom exhaust manifold by MTD
⚙️ Full exhaust 70/63.5 mm
⚙️ External wastegate
⚙️ Custom intake
⚙️ Upgraded intercooler 550x230x65
⚙️ Water/meth injection kit Aem
⚙️ Boost controller iboost with canbus
Tuning:
🖥 Stage4 software
🖥 Full N mode unlock for esp off switch use
🖥 Pops n bangs
🖥 Hardcut limiter
🖥 Launch control
Figures :
📈 Boost off 1 bar @ 250hp
Boost low 1.3 bar @ 280hp
Boost high 1.6 bar @ 335hp
Boost race 1.72 bar @ 352hp
📈 Max torque : 39kg
📈 Spark advance: 12 degrees @ limiter
📈 Afr : 11.3
The engine was in great condition and the setup is truly a perfect combination .
Even at 350+ hp we had no advance retarding by ecu and so we could even push to 370hp easily.
Garrett gtx2860 gen2 works at the center of compressor map with 1.72 bar between 5000-7200 rpm , with 73% efficiency. This is why the engine was not struggling at all.
If we used 1.9 bar we would see around 370hp and 42kg torque.
Exhaust manifold and custom camshaft helped the most improving the volumetric efficiency of the engine, as always
The mapping at middle rpm kept really safe in order to protect the oem engine rods. The rev limiter was set at 7200rpm also for safety reasons.
We would like to thank our partner slp_tuning_service for assembling and keeping beautiful the setup
#multiair_power #multiair_rules #mito_limited_edition #alfa_romeo
#quore_sportivo #mtd #multiair_tuning
#efficiency_is_everything
#in_multiair_we_trust
