Welcome welcome! In this video I make twig pot twins using a lathe and multi axis wood turning methods.

A piece of black walnut was mounted onto a waste block then shaped before being cut in half, rotated 90 degrees, shaped some more.
The blanks were then mounted individually in the spindle orientation to remove waste wood and shape the top of the vases.
Finally a sand and a coat of shellac to finish.

The reason I only turned two sides was because the wood had got some very nice figure in places, I left the two best looking sides. Sometimes wood doesn't need a shape, It's natural beauty does just fine.


Thanks for watching! Please feel free to leave a comment on what you liked or disliked. If you enjoyed this, please consider subscribing to the channel. It's completely free and helps a lot! Hopefully see you all again soon! Thank you for your support.


Follow me on the socials:

[ Ссылка ]
[ Ссылка ]


My pieces are often for sale on Etsy:
[ Ссылка ]
If you would like to purchase something that isn't on Etsy please feel free to send an email to: tfturning@gmail.com


Alternatively, if you want to directly support the channel, you can here: [ Ссылка ]
No amount is too small and this money will always go towards the purchase of tools and materials for more turning content.


#tfturning #Woodturning #Woodworking

00:00 - Intro
00:12 - Black Walnut
00:35 - Drilling, marking and mounting to the lathe
01:05 - Facing up the blank
01:32 - Shaping side 1
02:54 - Cutting in half, rotate and remount
03:35 - Shaping side 2
04:21 - Shaping the top and parting off vase 1
06:38 - Shaping the top and parting off vase 2
08:30 - Final sanding and a close look
08:55 - Shellac finish
09:18 - Close ups
09:47 - Thanks for watching!


*These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk, my practices may not always be correct or the safest. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment!

свернуть