Recently we took the Hitachi 15-gauge angled finish nailer,NT65MA4 to our jobsite to review.
Historically we have used 16-gauge finish nails on our trim work. 16-gauge finish nailers have a smaller diameter and generally smaller and lighter nailers. 15 gauge nailers boast greater holding power, were heavier, and to be honest – we’ve never really used them much.
The Hitachi NT6MA4 is a lightweight pneumatic nailer that requires oil occasionally, to keep the tool lubricated and functioning at optimal levels. It weighs 4.4 lbs. and operates on 70-120 PSI.
Capacity
The Hitachi 15-gauge angled finish nailer, accepts 15-gauge nails [34-Degrees] ranging in length from 1-1/4 inch to 2-1/2 inch.
We normally use angled nailers and liked that the Hitachi angled magazine allows the nailer to fit in tight corners and spaces.
We found the nailer easy to load, its rear-loading, magazine has cut-outs to monitor the nail feeder and the magazine accepts 100 nails. A tool-less, easy-to-clear nose for quick nail extraction should a nail jam during use.
