Manually loading and unloading large bearings all day is tedious and can cause injuries.

In this cell we used two ABB 6-axis robots to unload the bearings from the inbound conveyor and transfer them to various seal press and crimping stations.

Each robot is equipped with both a gripper for the bearings and vacuum cups for seals. Custom 3-stack magazines allow seals to be loaded without stopping the machine.
Seals are pre-pressed onto both sides of the bearings in the tamping presses and then transferred to the TOX press stations for final crimping.
Both sides of the bearings are sealed and crimped before exiting the system. The process can run continuously and can handle up to 32 different recipes with quick tool changes.

Robots used: ABB 6-axis IRB 2600, 20kg payload and 1.65m reach
[ Ссылка ]
Servo presses: Tox C-frame benchtop press, series EMPK/CMB
[ Ссылка ]
Grippers: Schunk, [ Ссылка ]
Tool changers: ATI, [ Ссылка ]


The system was completely designed, built, programmed, and tested in-house by our expert engineers and technicians.

Timecodes:
0:00 - Intro
0:07 - Bearing Seal, Robotic Assembly
0:25 - Custom Made Seal Loader
0:47 - Pneumatic Singulator
1:05 - Tamping Presses
1:24 - Automatic Crimping Stations
1:49 - Custom Pallet and Machine Guarding
2:03 - Contact Us

To learn more about what we can do for your application, please visit: [ Ссылка ]

Or reach us at (919) 534-1500 or info@solaraautomation.com

свернуть