Our company is pleased to present you a completely new development which has no analogies in the world, the processing any type of grain.

[ Ссылка ]

Separator CAD represents a new method of separation that is based on the principles of the stream (jet) technique and aerodynamic flows, which allows the separation of the source material according to its relative density with high preciseness.
CAD separator grain cleaner replaces 3 or 4 machines within one technological line, – all of these mechanisms can be now replaced by our machine. For one processing pass, CAD separator can clean and allocate seeds by their relative density and divide them into independent fractions. The first fraction consists of heavy impurities (stones and hard substances), the second and third are of seeds with the highest relative density, and the fourth and fifth fractions are of seeds with the lowest relative density.
CAD separator is capable of processing small-seeds cultures (Lucerne, popper, rape) and oats, barley, wheat, maize, peas, and many other cultures and bulk materials as well. The machine has the following advantages:
* it does not damage the grain;
* has a low energy consumption level (from 1.2 KW/hour to 36 KWhour, depending on the machine’s productivity);
* reliability and durability due to design simplicity (absence of cinematic schemes and lubricant points);
* it does not require maintenance;
* it is capable of producing products at any level of humidity and impurity;
* high operating efficiency (it does not require expensive maintenance, there is no need for selection and replacement of the sieves for every type of grain, there is no necessity for careful and long cleaning after usage, and it can recoup itself within just one season).
* Our machines has high technological potential;
* - separating the mixture of wheat and barley (up to 60% for one operation);
- selecting the peas damaged by bruchus (Bruchus pisorum); - cleaning 100% of the seeds of wheat, barley and other crops from seeds of wild oats (Avéna fátua);
- separating rotten corn from healthy corn (dry);
- separating grain in the air flow while simultaneously drying the seeds (up to 2% per passing);
- selecting from the row crop the most viable (biological valuable) and productive grains;
- raising the class of grain mass (selecting feed fraction and increasing the quality level of the grain).
[ Ссылка ]...
+38-050-614-52-57

свернуть