Buy Now!
New Tie Rod Set from 1AAuto.com [ Ссылка ]
New Tie Rod from 1AAuto.com [ Ссылка ]
This video shows you how to replace the inner tie rods on your 2011-2019 Ford Fiesta. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.
This repair was done on a 2012 Ford Fiesta S 1.6L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2011 Ford Fiesta
2012 Ford Fiesta
2013 Ford Fiesta
2014 Ford Fiesta
2015 Ford Fiesta
2016 Ford Fiesta
2017 Ford Fiesta
2018 Ford Fiesta
2019 Ford Fiesta
Tools you will need:
• 13mm Wrench [ Ссылка ]
• 22mm Wrench
• 18mm Socket
• 22mm Socket [ Ссылка ]
• Inner Tie Rod Removal Tool [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Pliers
• 3/8 Inch Impact Gun
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• Wire Ties
• Center Punch [ Ссылка ]
• Hammer
Subscribe: [ Ссылка ]
Check out our playlist:
Ford Fiesta 2011-2019 6th Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
