Step-by-step guide on how to remove and replace the front driver door power window switch / power window regulator on Volkswagen Jetta City. Power window not going up or down? Power window button gets stuck? It might be time to replace it. ( 2005 | 2006 | 2007 | 2008 | 2009 | 2010 | GLI | TDI | 2.0L | 1.9L | 2.5L ).

There is no special tools necessary to replace the power window switch on vw jetta. All you need is a pry tool. If you don't have one you can use a flat screwdriver, just be careful not to damage the door panel. Once you have the switch out, disconnect the electrical connector. Then you will have 3 phillips screws to unscrew and separate the switch form its plastic base. That's it. If you are replacing the switch on regular volkswagen jetta, instead of phillips screws, there will be black tabs which you have to unclip.

Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!

⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть