Click for more info and reviews of this Stromberg Carlson Camper Jacks:
[ Ссылка ]
Check out some similar Camper Jacks options:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Today we are going to review part #: JSC-24, this is the Stromberg-Carlson leveling scissor jack set with a 24 inch lift. These two leveling scissor jacks will raise, lower and stabilize any camper or trailer. They do remain steady on the soft surfaces because of the wide bow tie foot plate on each jack. The mounting plate can be bolted on using the holes in them are welded on also. This part will include two steel jacks and one crank handle. This part is made in the USA.
This jack does have a capacity of 5000lbs per jack, so combined weight capacity of 10,000lbs and I am going to give you a few measurements on this. I am going to first measure the foot pad and the width on this will be 4 1/2 inches and the length of the foot pad would be 9 inches and the measurement on the mounting plate, the length will be 10 inches and the width will be 3 1/2 inches. Now this jack is in the retracted position or totally collapsed, so the retracted height will be 4 inches. This one I have cranked out all the way to the extended position, so when this jack is in the fully extended position it will be 24 inches from the trailer to the foot plate, so you will have 24 inch lift on this jack. This jack does come with a one year limited warranty and basically you would just take the socket on this crank handle, put it on to the bolt head on the worm gear and as you crank it, when you crank it counter clockwise it will retract the jack and when you crank it clockwise it will extend the jack out.
And that should do it for our review on part #: JSC-24.
Ещё видео!