Shop for New Auto Parts at 1AAuto.com [ Ссылка ]

This video shows you how to install new rear lower rearward control arms from TRQ on your 2004-2009 Audi A4 Quattro. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.

Estimated installation time for a professional technician is approximately: 3 hours 18 minutes

This repair was done on a 2007 Audi A4 Quattro Base 2.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2004 Audi A4 Quattro
2005 Audi A4 Quattro
2006 Audi A4 Quattro
2007 Audi A4 Quattro
2008 Audi A4 Quattro
2009 Audi A4 Quattro

Tools you will need:
• Pry Bar [ Ссылка ]
• 18mm Wrench
• 17mm Socket [ Ссылка ]
• 18mm Socket
• Gloves [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Punch
• Wheel Chocks

Subscribe: [ Ссылка ]

Check out our playlist:
Audi A4 2004-09 3rd Gen (B7): [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть