[ Ссылка ]

Installing your Nanuk Lid Organizers takes about 5 minutes.

Step 1: Make sure your lid organizer is clean. Use the available alcohol tabs to clean up the lid if necessary and allow to dry.

Step 2: Remove the adhesive backing of the lid organizer to expose the hook and loop adhesive.

Step 3: Install the lid organizer into the lid of the case

Step 4: Apply pressure around the four sides of the divider to ensure the adhesive sticks to the case. (Do not remove the lid organizer for 24hs to allow the adhesive to fully bond to the case).

Step 5: Assemble the screws into the silicone washers and install into the case using a Philips head screwdriver. (Some cases may not have screw posts in the lid of the case. Only use the hook and loop fasteners for these cases.

Step 6: Tighten the screw until resistance is felt. Do not overtighten.

[ Ссылка ]

свернуть