Guide on how to get Simon K firmware onto hobbypower brushless 30A esc. This vid shows all the problems which could be encountered when trying to get SimonK firmware onto a ESC.
The first problem will be the driver for the USBasp. the second problems will be that Windows 10 wont let you use the correct driver because the digital signature isn't correct? So after finally getting the correct driver loaded i then go on to show you the correct settings and how to connect up the ESC to get it loaded using a chip programing adaptor.
you will need the following.
KKMulticopter Flash Tool from this website
[ Ссылка ]
SimonK GitHub is at this address.
[ Ссылка ]
But more important is the list which shows which firmware to use for which ESC.
[ Ссылка ]
Thanks to SimonK and lazyzero for the firmware and software.

свернуть