Buy Now!
New Engine Torque Strut Mount from 1AAuto.com [ Ссылка ]

This video shows you how to install a new torque strut engine mount on your 2007-2011 Toyota Camry. The torque strut engine mount braces the engine against twisting, shaking, and vibrating when under load, and when load changes suddenly. The rubber bushings on the torque strut mount will wear down over time, and need to be replaced, even if the strut itself is in good condition. You'll know it's time to replace the torque strut engine mount when you feel vibration or shaking, especially when accelerating.

This repair was done on a 2007 Toyota Camry SE 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry

Tools you will need:
• 10mm Socket [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses

Subscribe: [ Ссылка ]

Check out our playlist:
Toyota Camry 2007-2011 6th Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть