Buy Now!
New Control Arm Bushing Set from 1AAuto.com [ Ссылка ]
New Control Arm Bushing Kit from 1AAuto.com [ Ссылка ]
Rubber bushings help smooth out a ride, but are susceptible to wear or drying out and crumbling over time. This bushing is replaceable separate from the control arm, and you can replace it yourself. This video shows you how to install a new control arm bushing on your 1988-2000 Chevy C/K1500.
• Check here for more videos on the 1988-2002 Chevy K1500 [ Ссылка ]
This repair was done on a 1994 Chevrolet K1500 Truck Base 5.7L and the process should be similar on the following vehicles:
1988 Chevrolet K1500 Truck
1989 Chevrolet K1500 Truck
1990 Chevrolet K1500 Truck
1991 Chevrolet K1500 Truck
1992 Chevrolet K1500 Truck
1993 Chevrolet K1500 Truck
1994 Chevrolet K1500 Truck
1995 Chevrolet K1500 Truck
1996 Chevrolet K1500 Truck
1997 Chevrolet K1500 Truck
1998 Chevrolet K1500 Truck
1999 Chevrolet K1500 Truck
Tools you will need:
• Pry Bar [ Ссылка ]
• 21mm wrench
• 18mm Socket
• 21mm Socket
• Ball Joint Press
• Side Cutters
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Copper Anti-Seize
• Liquid Thread Locker
• Marker / Writing Utensil
• sanding disc
• 3/8 Inch Allen Wrench [ Ссылка ]
• Center Punch [ Ссылка ]
• Hammer
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Chevy K1500 Pickup 1988-2002: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
