Our V-Bottom skiff is really starting to take shape and this week is a big moment because we're installing the chines. You remember we sourced these at the lumber mill and then processed them in my front yard and now they're going in the boat. The chines are very important pieces in the boat and that why we went through a lot of trouble to get just the right lumber. They need to be fit inside the bottom plank and up against the stem in the bow and then bent inboard back aft until they can clear the transom and then bend back against the back of the plank. We have to be very precise here so we don't cut them too short. We also want to take a moment to bevel the forward end of the chine to accept the bottom planking and that needs to be done off the boat because it would be hard to work on in position without damaging other parts of the boat.
Next episode - hanging frames!
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
