Buy Now!
New Wheel Bearing from 1AAuto.com [ Ссылка ]
New Wheel Bearing Set from 1AAuto.com [ Ссылка ]
This video shows you how to install new front wheel bearings from TRQ on your 2014-2019 Toyota Highlander.
This repair was done on a 2014 Toyota Highlander XLE 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2014 Toyota Highlander
2015 Toyota Highlander
2016 Toyota Highlander
2017 Toyota Highlander
2018 Toyota Highlander
2019 Toyota Highlander
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 10mm Wrench [ Ссылка ]
• 22mm Wrench
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket
• 21mm Socket
• 22mm Socket [ Ссылка ]
• 30mm Socket
• Acetylene torch
• Brake Caliper Hanger [ Ссылка ]
• Cutoff Wheel
• Hub Puller
• Press
• Tie Rod Puller
• Locking Pliers [ Ссылка ]
• Pliers
• Snap Ring Pliers
• 1/2 Inch Impact Gun [ Ссылка ]
• 3/8 Inch Drive Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Chisel [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Pick [ Ссылка ]
• Rubber Mallet
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
2014 - 2019 Toyota Highlander 3rd Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
