BMW R1250GS Front Wheel Alignment. An often-overlooked factor when it comes to the action of your motorcycle’s front forks is the front wheel alignment.
Step 1:
Making sure the axle has slid through fully, lightly snug the axle 17mm nut.
Step 2:
Now, tighten the axle 17mm nut, Torque value: 30Nm.
Step 3:
Next, snug the left side T45 pinch bolts, Torque value: 19Nm.
Step 4:
With the right side T45 pinch bolts loosened, make sure the axle carrier floats freely on the axle. This is absolutely crucial. Using your hands, push the axle carrier toward and away from the wheel on the axle. The carrier should move millimeters in either direction without much effort.
Step 5:
Having checked that the axle is free floating, spin the front wheel with some force.
Step 6:
The effect can be created by compressing the forks while the bike is on the stand. Allowing it to float to its happy place on the axle.
Step 7:
Once you’ve determined the axle has found its sweet spot, torque the right side T45 pinch bolts, Torque value: 19Nm.
Step 8:
Enjoy the ride!
寶馬 R1250GS 前輪定位. 當涉及到摩托車前叉的動作時，一個經常被忽視的因素是前輪定位。
步驟1：
確保車軸完全滑過，輕輕擰緊車軸 17mm 螺母。
第2步：
現在，擰緊軸 17mm 螺母，力矩值：30Nm。
第 3 步：
接下來，擰緊左側 T45 夾緊螺栓，扭矩值：19Nm。
步驟4：
鬆開右側 T45 夾緊螺栓，確保軸架在軸上自由浮動。 這絕對是至關重要的。 用手將軸架推向和推離車軸上的車輪。 載體應毫不費力地向任一方向移動毫米。
第 5 步：
檢查車軸是否自由浮動後，用一些力轉動前輪。
第 6 步：
當自行車在支架上時，可以通過壓縮前叉來產生這種效果。 讓它漂浮在車軸上的快樂位置。
第 7 步：
確定車軸找到最佳位置後，擰緊右側 T45 夾緊螺栓，扭矩值：19Nm。
第 8 步：
享受旅程吧！
