Speed limit adjustment method:

After the scooter is turned on, press and hold the [MODE] button and the [power] button at the same time to enter the parameter setting meeting, and press the [power] button to select the parameter (adjust to the P08 parameter), press the [MODE] button to select the value (adjust the speed setting by adjusting the value. 100 means remove the speed limit mode and ride at the described gear speed. The corresponding speed of about 50 is 25km/h. and so on.). After adjusting to the parameters you want to adjust, press and hold the [MODE] button and the [power] button at the same time to exit the parameter setting, and the parameters are modified.

------------------- Introduction to the P-parameter ----------------------
P01: Backlight brightness. 1 level darkest, 3 level brightest; default: 3

P02: Set the speed/mileage Unit, 0 value: KM; 1 value: MILE; default: KM

P03: Voltage level: 24V, 36V, 48V, 52V, 60V, default: 52V

P04: Sleep time, 0 means no sleep; other numbers are sleep time, range: 1-60; the unit is minute; default: 5

P06: wheel diameter: unit, inch; accuracy: 0.1; default: 10.0

P07: Number of speed magnets: range: 0-255; default: 28

P08: Speed limit mode settings: default: 100

P09: Start Mode Settings:, 0=zero start; 1=non-zero start; default: 0
(In zero start mode, press the accelerator to ride; In the non-zero start mode, you need to use your feet to help the scooter slide a certain distance, and give the scooter a speed of about 5km/h before the scooter can ride.)

P11: EABS switch selection, range:0-5,0: not on, 1: weakest; 5 strongest

P12: Soft and hard start strength, range:1-5, 1: weakest, 5: strongest; default: 3

P15: Controller undervoltage value, undervoltage value according to P03 setting voltage level to set, example: P03 setting 52V, undervoltage value range: 37.0-47.0, accuracy 0.1; default 42.0

P16: ODO clear setting Long press plus key for 5 seconds ODO clear. Data cannot be recovered after clearing.

P17: Cruise Control Settings: 0=cancel, 1=cruise control; default: 0
(Kindly Tip: Please pay attention to safety when using this cruise control mode. The cruise control still will continue to ride when the accelerator is released. To stop, you need to press the brake.)
--------------------------------------------------------------
If you have any questions, please contact us on KUGOO official website chat online or after-sales email.
KUGOO United States official sales website: [ Ссылка ], after-sales mailbox: market@kugooscooterusa.com
KUGOO Europe official sales website: [ Ссылка ], after-sales mailbox: market@kugoo-scooter.com
KUGOO UK official sales website: [ Ссылка ] , after-sales mailbox: service@kugooscooter.uk

свернуть