It’s all too common to see a pair of sprockets connected through a chain, driving the rear wheel of a motorcycle. However, it’s not the only final drive system used on motorcycles. Belt drive and shaft drive are the other two final drive systems, though they are not as ubiquitous as chain drive systems. So what exactly are the various advantages and disadvantages of the three drive systems, and what is it about chain drives that make them the preferred choice?
1. Belt Drive
A belt drive system isn’t as common as a chain drive system, though in terms of popularity, it stands at a distant second position. This setup comprises of a driving pulley towards the gearbox output shaft and a driven pulley at the wheel – the two pulleys are connected by a belt which has teeth, or grooves on the inner side, matching the grooves on the outer side of the pulleys. The belt is made of a rubber-like, but mostly a very strong synthetic material which lasts a very long time. Modern drive belts are strengthened with steel wires inside and Kevlar coating outside – such belt systems can last really long. You can expect a well maintained belt drive on a motorcycle to last in excess of 100,000 km or even more. Unlike chain drive, which requires very frequent cleaning, tightening and maintenance, belt drives are relative maintenance free. They run clean as they don’t have to be lubricated with sticky lubes and don’t require cleaning either. Belt drive systems also run much smoother, with much less jerks as compared to chain drives, and produce incomparably less noise too.
2. Shaft drive
To start off, shaft drive systems are the most expensive of the three systems we have here, and by some margin. They are, however, the sturdiest of the three, very smooth, and hardly ever need any maintenance. If designed and engineered well, drive shafts often last the life of a motorcycle without requiring any servicing or maintenance whatsoever. This system, as the name suggests, comprises of a shaft that’s connected to the gearbox output via a universal joint, which is essentially a coupling that facilitates transmission of rotary power at any selected angle. At the other end, the shaft is connected to the rear wheel hub via a spiral bevel gear. The bevel gear turns the direction of rotation of the shaft by 90 degrees to make the wheel turn. This entire drive system is bathed in oil for lubrication and sealed to protect it from any external elements, which makes it totally maintenance free.
Since shaft drive systems are heavy, expensive, and by themselves require more torque to work efficiently, they are not used on low-capacity or economy oriented motorcycles. They are used on large capacity (generally 600cc or above) motorcycles which produce good amounts of torque. Also, since shaft drive systems are very sturdy and reliable, they are often used in motorcycles built for the purpose of adventure, sports touring or adventure touring. In essence, these systems lend themselves very well for applications where the motorcycles have to run for very long distances, or in treacherous conditions, where minimizing breakdown possibility is top priority.
3. Chain Drive
Now that brings us to the trusty old chain drive systems. Comprising of a simple chain of linkages connecting sprockets, this is the drive system that an overwhelming majority of motorcycles implement. The sprocket connected to the gearbox output shaft is the driving sprocket and the one at the rear wheel is the driven sprocket, both are connected through a chain, which also comes in a variety of designs, but we’ll leave that discussion to some other day.
Now a chain drive system requires you to tighten it from time to time as the chain has a tendency to increase in length with time. There is an in-built provision in the swing-arm in motorcycles with chain drive systems to allow the rear wheel to move backwards by a limited extent. One has to check the motorcycle every 500-700 km for slack and adjust it if required. In addition, since chain drive systems are generally open to the elements and catch a lot of dust and grime, they have to be cleaned and lubricated every 500-700 km. This makes chain drive systems pretty service intensive and bothersome to an extent.
#ChainDrive #BeltDrive #ShaftDrive
The wait is finally over. I am here with YouTube's very first Mechanical Engineering Channel in HINDI.
In this channel i will upload videos related to mechanical engineering topics such as Automobile, Production, HMT, Thermodynamics, FM, CAD/CAM etc.
So subscribe my channel and learn everyday
Follow me on twitter: ⤵
[ Ссылка ]
Add me on Facebook: ⤵
[ Ссылка ]
Follow me on Instagram: ⤵ [ Ссылка ]
Contact me: ⤵
mechanicaltechhindi@gmail.com
