Buy Now!
New Sway Bar Kit from 1AAuto.com [ Ссылка ]
When your sway bar has rusted or bent to the point of causing problems with your suspension, steering, or alignment, you’ll need to replace it, and likely the links and bushings as well. This video shows you how to install an entire kit of sway bar, sway bar links, and sway bar bushings with brackets on your 2000-2006 Chevy Tahoe.
• Check here for more videos on the 2000-06 Chevy Tahoe [ Ссылка ]
This repair was done on a 2005 Chevrolet Tahoe Z71 5.3L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2000 Chevrolet Tahoe
2001 Chevrolet Tahoe
2002 Chevrolet Tahoe
2003 Chevrolet Tahoe
2004 Chevrolet Tahoe
2005 Chevrolet Tahoe
2006 Chevrolet Tahoe
Tools you will need:
• Pry Bar [ Ссылка ]
• 18mm Wrench
• 10mm Socket [ Ссылка ]
• 18mm Socket
• 22mm Socket [ Ссылка ]
• Air Compressor
• 1/2 Inch Impact Gun [ Ссылка ]
• Swivel
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
Subscribe: [ Ссылка ]
Check out our playlist:
Chevy Tahoe 2000-06 2nd Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
