How to maintain screw air compressor? How to replace the oil separator?
Air compressor maintenance
1. Remove the pipe connected to the minimum pressure valve.
2. Loosen the nut under the minimum pressure valve and remove the corresponding pipe.
3. Loosen the pipe and screws on the oil and gas barrel.
4. Take out the old oil separator and put in the new oil separator. (To be placed in the center)
5. Install the minimum pressure valve and corresponding screws. (Tighten the screws on the opposite side first)
6. Install the corresponding pipes.
7. Install the two oil pipes and tighten the screws.
8. After ensuring that all pipes are tightened, the oil separator has been replaced.
[ Ссылка ]
Whatsappp: +86 178 0611 6146
