Buy Now!
New CV Axle Assembly from 1AAuto.com [ Ссылка ]

A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. This video shows you how to install a passenger side axle in your 2008-12 Honda Accord.

• Check here for more videos on the 2008-12 Honda Accord: [ Ссылка ]

This repair was done on a 2008 Honda Accord EX 3.5L and the process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord

Tools you will need:
• Pry Bar [ Ссылка ]
• 17mm Wrench [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket
• 36mm Socket [ Ссылка ]
• Side Cutters
• 3/8 Inch Impact Gun
• Torque Wrench [ Ссылка ]
• Brake Grease
• Center Punch [ Ссылка ]
• Hammer

Subscribe: [ Ссылка ]

Check out our playlist:
Honda Accord 2008-12 8th Gen: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть