As the video is in Chinese, below is the detailed steps in English

1.Plug in the proper battery first
2.Press “END” on the left and “Push” on the right and power on simultaneously (00:00:29)
3.Enter the stick Calibration menu
4.Calibrate each channel one by one
5.CH1
CH1UP
* Press “End” to empty the data value
* Push Rudder stick to the LEFT and the value will change to minimum
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH1CT
* Press “End” to empty the data value
* Toggle the Rudder stick at the center point
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH1DN
* Press “End” to empty the data value
* Push Rudder stick to RIGHT
* Press “MODE” to confirm and there will be [OK] shown on the screen
6.CH2:
CH2UP
* Press “End” to empty the data
* Push Rudder stick to UPWARD
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH2CT
* Press “End” to empty the data
* Toggle the Rudder stick
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH2DN
* Press “End” to empty the data
* Push Rudder stick to DOWNWARD
* Press “MODE” to confirm and there will be [OK] shown on the screen
7.CH3:
CH3UP
* Press “End” to empty the data
* Push Throttle stick to UPWARD
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH3CT
* Press “End” to empty the data
* Move the Throttle stick to center point
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH3DN
* Press “End” to empty the data
* Push Throttle stick to DOWNWARD
* Press “MODE” to confirm and there will be [OK] shown on the screen
8.CH4:
CH4UP
* Press “End” to empty the data
* Push Throttle stick to LEFT
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH4CT
* Press “End” to empty the data
* Toggle the Throttle stick
* Press “MODE” to confirm and there will be [OK] shown on the screen
CH4DN
* Press “End” to empty the data
* Push Throttle stick to RIGHT
* Press “MODE” to confirm and there will be [OK] shown on the screen

9.When finish all channels calibration with joysticks, power-off and repower-on AT10II

свернуть