Click for more info and reviews of this etrailer E Track:
[ Ссылка ]
Check out some similar E Track options:
[ Ссылка ]

[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]

Full transcript: [ Ссылка ]
Hi everyone. Aiden here at etrailer. Today we're gonna be taking a look at, and showing you how to install this etrailer E-Track single mount. This is gonna be one single piece of E-Track mount that you can put anywhere you want in your trailer, or your garage where you've got E-Track, or you just need a really simple tie-down point, somewhere to mount something like a hook or a tie-down loop or just any other E-Track accessory and you don't need a whole strip, like we have all throughout this trailer here. Let's check it out. This comes with all the hardware you need.

So you've got a screw and a flat washer and that screw just use a Phillips head bit to attach it. (tool whirring) So we'll just mount this up and throw some accessories on. (tool whirring) Any E-Track accessory you've got, whether it be a hook or something, maybe like a tie-down loop, it's all gonna function the same way. Now, this single mount here is going to have a 1,000-pound safe working load limit, which means it has a 3,000-pound break strength. So for most of the accessories you're probably using, you're not gonna get anywhere close to that 1,000-pounds unless you're maybe using it to tie something down.

You've got a ratchet strap running through it, adding a lot of pressure. But even then, I think you're gonna be well within the safe working load limit here most of the time. Just make sure you abide by that when you're hooking up to it. Now this trailer already had one of these single mounts in it on the floor here, so again, it's a great place to run a tie-down point to. If you're maybe using your trailer to hold things like golf carts, side-by-sides, four-wheelers, anything like that where you're maybe driving into the trailer and you don't want long strips of E-Track in here, you've just got a few dedicated tie-down points that you always know you're gonna be using because it's the same thing you're pulling in every single time.

You don't need a long strip for the versatility. Then this can work perfectly fine. It takes up a lot less room, and it's going to be a quicker setup because there's less to drill in. And that's all there is to it. Like any other piece of E-Track, you can use this however you want and whatever fits your needs the best.

But unlike the longer, larger pieces, you can put this really anywhere because it's so small and compact. But that'll do it for a look at the single mount of etrailer E-Track. Thanks for watching.

свернуть