Buy Now!
New Tie Rod from 1AAuto.com [ Ссылка ]

This video shows you how to install new TRQ outer tie rods on your 2014-2021 Mazda 6. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.

Estimated installation time for a professional technician is approximately: 18 minutes

This repair was done on a 2014 Mazda 6 Grand Touring 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2014 Mazda 6
2015 Mazda 6
2016 Mazda 6
2017 Mazda 6
2018 Mazda 6
2019 Mazda 6
2020 Mazda 6
2021 Mazda 6

Tools you will need:
• 21mm wrench
• 22mm Wrench
• 17mm Socket [ Ссылка ]
• 18mm Socket
• 21mm Socket
• Large Locking Pliers
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Side Cutters
• Ratchet [ Ссылка ]
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Copper Anti-Seize
• Gloves [ Ссылка ]
• Liquid Thread Locker
• Safety Glasses
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Large Hammer
• Wheel Chocks

Subscribe: [ Ссылка ]

Check out our playlist:
Mazda 6 3rd Generation 2014-2021: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть