In this episode of Repair and Replace, Vance shows how to replace the handle in a Delany Flushboy, Rex, or Presto flush valve. This applies to both commercial toilets (water closets) and urinals.

Note: these steps might be compatible with Crane and Powers flush valves as the models are very similar.

If the handle assembly is worn down or starts sticking, the flushometer may not function. Additionally a worn handle might also cause short flushing if it fails to open the relief valve enough.

Browse flushometer replacement parts: [ Ссылка ]

Handle Assembly: [ Ссылка ]
Handle Seal: [ Ссылка ]
Handle Stem: [ Ссылка ]

More Delany Flushboy, Rex, or Presto Repairs:
[ Ссылка ]

___________________________

00:00 Intro
00:22 What You'll Need
00:30 How it Works
01:28 Step 1: Shut Off the Water
01:47 Step 2: Remove the Handle
02:03 Step 3: Replace the Inside Parts
02:24 Step 4: Install the Handle

___________________________

AMRE Supply provides homeowners, service contractors, and property management with the parts and knowledge needed to get the best performance out of any property. Stocking the largest selection of appliance parts, heating, plumbing, lighting, and janitorial supplies, AMRE ships almost anywhere in Canada within 24 - 48 hours. Expert help is available online, over the phone or in person at one of the many locations across Canada.

Connect with AMRE Supply
Website - [ Ссылка ]
Facebook - [ Ссылка ]
Twitter - [ Ссылка ]
Instagram - [ Ссылка ]

свернуть