Horizontal tee with SWK: When creating a tee, use the installation guide to find your cutting pattern. Bend the side wires to 45 degrees with a large screwdriver, then secure the side wires with an SWK splice washer kit, add SWK splices to secure the bottom wires.

Horizontal tee with EZT90: For cutting steps, follow the installation guide for an EZT90 tee. The EZT90 bar makes the unit strong and works on any horizontal fitting; thread all nuts loosely first, then tighten for a secure junction. One EZT90 kit will make one tee junction.

Horizontal tee with RADT90: For cutting steps, follow the installation guide for an RADT90 tee. RADT90 is perfect for radius bends and large data center installations. The RADT90 creates a radius turn that makes pulling cable easier and provides additional cable support in the radius area.

свернуть