We are going over the steps to fix the common window 1/4" bounce issue for the S550 Mustang. Sadly, some of the Mustang have a factory defect in which the passenger window will jump up and down (about 1/4") randomly. The solution in this video is not 100% guaranteed, however it has had positive results.
1. The Problem - 0:01
2. Step 1 (Remove Door Handle Trim) - 0:36
3. Step 2 (Remove Upper Trim Panel Bolt) - 0:52
4. Step 3 (Remove Window Control Switch) - 1:11
5. Step 4 (Remove Center Trim Panel Bolt) - 1:50
6. Step 5 (Remove Trim Panel Lower Retainers) - 2:10
7. Step 6 (Detach Door Panel) - 2:30
8. Step 7 (Disconnect Electrical Connectors) - 3:04
9. Step 8 (Release Latch Cable) - 3:32
10. Step 9 (Remove Door Panel) - 3:59
11. Step 10 (Remove Door Speaker) - 4:06
12. Step 11 (Disconnect Window Regulator) - 5:03
13. Step 12 (Clean Window Regulator Pins) - 5:32
14. Step 13 (Apply Dielectric Grease) - 5:52
15. Step 14 (Reconnect Window Regulator) - 6:54
16. Step 15 (Install Door Speaker) - 7:14
17. Step 16 (Torque Speaker Bolts) - 7:33
18. Step 17 (Reattach Latch Cable) - 7:58
19. Step 18 (Reconnect Electrical Connectors) - 8:23
20. Step 19 (Install Door Panel) - 8:41
21. Step 20 (Install Trim Panel Lower Retainers) - 9:04
22. Step 21 (Torque Trim Panel Lower Retainers) - 9:15
23. Step 22 (Install Center Trim Panel Bolt) - 9:24
24. Step 23 (Torque Center Trim Panel Bolt) - 9:37
25. Step 24 (Install Window Control Switch) - 9:45
26. Step 25 (Install Upper Trim Panel Bolt) - 10:09
27. Step 26 (Torque Upper Trim Panel Bolt) - 10:20
28. Step 27 (Install Door Handle Trim) - 10:30
29. Step 28 (Test Window Operations) - 10:40
Products Used:
This video contains affiliate links for which I may receive compensation.
1/4" Torque Wrench - [ Ссылка ]
Dielectric Grease - [ Ссылка ]
Hook and Pick Set - [ Ссылка ]
Magnetic Pick-Up Tool - [ Ссылка ]
Nitrile Gloves - [ Ссылка ]
Trim Removal Tool Set - [ Ссылка ]
Tools:
1/4" Socket Wrench
7mm Socket
10mm Socket
90 Degree Pick
Magnetic Pick-Up Tool
Needle Nose Pliers
Trim Removal Tool Set
Torque Wrench (13-48 in-lb.)
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on YouTube is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on YouTube. Use this information at your own risk.
#Defect #Mustang
