Buy Now!
New Tie Rod Set from 1AAuto.com [ Ссылка ]
New Tie Rod from 1AAuto.com [ Ссылка ]
This video shows you how to install outer tie rods on your 2007-2009 Saturn Aura. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.
This repair was done on a 2007 Saturn Aura XE 3.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Saturn Aura
2008 Saturn Aura
2009 Saturn Aura
Tools you will need:
• 21mm wrench
• 18mm Socket
• 19mm Socket
• Side Cutters
• 1/2 Inch Impact Gun [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• Hammer
Subscribe: [ Ссылка ]
Check out our playlist:
Saturn Aura 2007-2009 1st Generation: [ Ссылка ]-
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
