How to install new seals on a vintage coleman lantern.
If your tank won't hold pressure for an extended period of time (i.e you have to keep pumping it up) you basically have 3 main issues:
1.) Cap seal leaking
2.) Check Valve leaking
3.) Hole in font (aka tank)
Replacement Cap seals: [ Ссылка ]
If the cap seal is good and/or has been replaced, then your Check Valve is the next thing to look at. You can try and clean the Check Valve with carb cleaner inside the pump tube. If that does not work the Check Valve will need to be removed, cleaned or replaced. There is a special tool to remove a check valve. [ Ссылка ]
If you enjoy my videos, I would appreciate your support:
[ Ссылка ]
Camera:
Canon M50
iPhone 11
Boya By-M1 Lavalier Mic
Amp mic'd: Rode VideoMicro
Lighting:
Aputure Amaran AL-M9
Neewer 26" Soft Box
DIY Cake Pan Light: [ Ссылка ]
About This Channel:
This channel has a wide variety of content. I’m interested in many things and topics. I create video's on things I like and what I feel my subscribers would like as well.
This channel is basically about two things:
1.) Show you how to MAKE things, FIX things, TIPS on how to do things and to give you IDEA'S on how to make your life a bit easier! I encourage you to use your hands the to learn something new!
2.) People say I do fun and interesting things and have interesting hobbies. I like to share that with you and I hope this inspires you to do things and to get out there as well!
Thanks for stopping by. I’d appreciate if you subscribe, you never know what video may inspire you!
