PCIE 1X SATA Card 10 Ports, 6 Gbps SATA 3.0 Controller PCIe Expansion Card, Non-Raid, Support 10 SATA 3.0 Devices, with Low Profile Bracket and 10 SATA Cables.




Product name: 10-port SATA3.0 expansion card

Product interface: PCI-E 1X

Product chip: ASM1166

Support system: Windows 8 / Windows10 / Ubuntu /Linux.

(Synology can only recognize 4 hard drives; WIN7 users are not recommended to buy)




Specification:

1. Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0 / SATA1.0

2. Comply with PCI-Express v3.0 specification and backward compatible with PCI-Express v2.0 / 1.0.

3. Support 6.0Gb/s, 3.0 Gbit/s and 1.5 Gbit/s

4. Support hot swap.

5. Compatible with SATA6G, 3G and 1.5G hard drives

6. Motherboard applicable slot PCI-E 1X and above

Note: RAID is not supported. The RAID in INTEL only applies to raw SATA. It is an expansion card that cannot support third-party chips.


Speed description information:

1. Use SATA3.0 data cable to achieve the best results.
(We recommend using this SATA 3.0 card in the PCIE3.0 slot to get the fastest speed.)

2. PCI-E requires a slot above V2.0. For V1.0, the speed will not exceed 250M.

3. Motherboard BOIS setting: SATA mode should be changed to AHCI.
Although some motherboards are PCIE 2.0 version, BOIS does not enable gen2 high-speed mode by default and needs to be turned on manually.
The fastest speed of PCI-E 2.0 is 380-450 m/s.
Different computer configurations and SATA SSDs have different speeds.

If the detection is incomplete or unstable, please contact us to send the driver.

свернуть