Using compressors (properly) is ESSENTIAL in producing and mixing world-class music! Alongside volume control, equalisation (and our ears!), they are arguably one of the most important mixing tools we have at our disposal.
►► Download my Top 30 Essential EDM mixing tips here [FREE]...
[ Ссылка ]
They are also one of the most abused and misunderstood tools (*sad violin music*), but don’t feel sorry for them…. they will CRUSH the life out of your mix if you give them half a chance.
In this video, I explain all the core controls that decent compressors have (Threshold, Ratio, Attack, Release, Output Gain and Knee), and how they work.
I then go through 4 examples of why, where and how you might want to compress.
Here are the timestamps:
00:00 Introduction
00:28 What compressors ACTUALLY do
01:55 How a compressor works (the controls)
02:32 Threshold
02:59 Ratio
03:23 Attack
03:53 Release
04:20 Output Gain
04:30 Diagram
06:10 Using compression to tame peaks in volume
09:05 Using compression to fatten a sound
11:03 Using compression to create energy
12:35 Using compression to glue sounds together
Here's a quick summary if you can't be bothered to watch the vid (shows audio examples, so recommend it if this is new to you):
Compressors are just volume controllers. A bit like having an elf on the mixer, riding the volume fader up and down in response to the audio signal entering it. Filthy little elf.
All compressors have threshold, ratio, attack, release knobs. Decent ones also have soft/hard knee and output gain. Here's what they do:
Threshold: Sets the level above which the signal is compressed. so if it's set to -4dB, only audio louder than -4dB will be compressed.
Ratio: The extent to which the audio above the threshold is compressed. A 1:1 ratio won't compress it at all (i.e reduce it's volume). 1:2 will halve the volume. 1:4 will quarter it, etc.
Attack: This determines the speed at which the compression is applied. So a very quick attack will compress the signal straight away, whereas a slow attack will let the first part through without compressing it.
Release: As you'd expect. A quick release will stop compressing the signal quickly (i.e. stop reducing the volume of anything above the threshold), and a long release won't.
Soft/Hard Knee: Determines how smoothly the signal is compressed above the threshold. If a hard knee, the full compression ratio is applied to EVERYTHING above the threshold. The softer the knee, the more gentle the transition from non-compressed to fully compressed. Visually, it would be kind of like two colours either having a sharp line between them, or a smooth gradient.
Output Gain: When you compress a signal, it reduces it's volume. The output gain is just used to make-up that volume at the end of the compression process.
--
Here are the 4 main reasons to compress:
Taming the peaks of a signal. If you have a vocal with some loud parts and some soft, you can pull the loudest parts into check to avoid clipping. Generally gentle settings on the threshold and ratio. Season with attack and release to taste.
Fattening a sound. Basically making it more sustained and squashed, which allows it to sound louder and fatter without clipping. Short attack, long release. Tip: Don't do this on everything, and do it for a good reason! Can kill a mix's dynamics if abused.
Adding energy. Great for percussive stuff. Longer attack (to let the transients through, like a drum hit) and longer release.
Glueing sounds together. If got a layered sound, some light compression can "gel" the layers together and make them sound more cohesive.
--
There are more ways to use compression (e.g. sidechain, buss compression, mastering, etc.) but they are all based on these 4 concepts, so I’ve kept things basic for this vid.
Hope you enjoy, and let me know if I've missed anything / been unclear.
Cheers!
►► Here's what I used to make this video:
My Audio Gear:
Audio Interface: Focusrite Scarlett 2i2 [ Ссылка ]
Monitors: Behringer Truth B2031A [ Ссылка ]
Headphones: Sennheiser HD 650 [ Ссылка ]
Microphone: sE X1 S Studio Bundle [ Ссылка ]
Microphone: Rode NT-USB [ Ссылка ]
Computer: Macbook Pro [ Ссылка ]
My Video Gear:
WebCam: Logitech Brio 4K [ Ссылка ]
Studio Lighting: Neewer Pack [ Ссылка ]
My Plugins: [ Ссылка ]
#compression #compressor
How to Use a Compressor (Properly!)
Теги
how to use audio compressioncompressioncompressor pluginsusing compression for EDMusing a compressorhow to use a compressorhow do i use a compressorhow to use compressionhow does a compressor workhow to use a compressor properlycompressor tutorialEDM tutorialcompression tutorialsetting a compressorset a compressoraudio compressionedmtipswill darling