Patreon Page
[ Ссылка ]
I use Esun PLA Pro orange for all my printed parts (affiliate links)
[ Ссылка ]
I also switched from PEI to Print in Z. sticks like PEI but you can beat the snot out of it and not hurt it. Use Code TODAY3D for 10% off I get nothing from this but LOVE the product. its on 100% of my printers now (8 of them)
[ Ссылка ]
I use the "skin" (cheaper) and stick it to a Mirror Pane on my CR-10 and a Glass Plate on my Wanhao and Maker Selects
Mirror Pane CR-10 $8
[ Ссылка ]
Glass Plate Maker Select $23
[ Ссылка ]
Manufacturered and very nice Z Brace kit ready to go
[ Ссылка ]
Thicker Replacement Y Carriage Plate $28
[ Ссылка ]
OK links to the mods I have installed.
Z Brace Kit
[ Ссылка ]
Thumbwheels for Leveling
[ Ссылка ]
Tower Gantry Support Feet to go with Z Brace Kit
[ Ссылка ]
The Blower I prefer
[ Ссылка ]
Corner Shields
[ Ссылка ]
The oiler/duster I prefer
[ Ссылка ]
Chain Riser I modified to make stronger
[ Ссылка ]
Some things I made
Adapters in case you got 1/4" hardware instead of 5/16's for the z brace kit
[ Ссылка ]
Spring Cups I made. none fit my maker select spring)
[ Ссылка ]
Spool Riser and Filament Guide I made
[ Ссылка ]
Alcohol Spray Bottle Holder Tray Holder I made
[ Ссылка ]
Stuff I bought for the upgrades
Aluminum Plate upgrade I got
[ Ссылка ]
Boro Glass Plate I got
[ Ссылка ]
Self Stick PEI 3mil surface I got
[ Ссылка ]
The Extruder I use (amazing) Flexion
[ Ссылка ]
The new stepper I needed (stock not strong enough for flexion)
[ Ссылка ]
You will need to swap the center two wires on your printers cable for this to work if the motor just jitters when you plug it in and try to use it.
Assorted m3 and m4 screws and nuts.
I also bought the hardware kit from ultimate 3d but I don't advise it as its for a different z brace kit and a wee bit expensive but it is "ready to go all in one" just print the parts.
I also bought the longer bearings but I am not impressed with their smoothness and maybe be looking for higher quality smoother bearings soon as my prints are coming out so fine now that I am seeing artifacts in the surface finish that is likely from the bearings and the tensioners and stuff.
