Wechat & whatsapp 0086 15175186785
Email: hbgreatestmachine@163.com
5-12mm construction rebar wire mesh fence panel welding machine
Automatic welded wire mesh welding machine makes weld rolled mesh or panel mesh for construction, building, reinforcing and road, etc.
5-12mm construction rebar wire mesh fence panel welding machine
Wire mesh welding machine normally can be classified into three types as below:
1.Rebar mesh welding machine 6-12mm
Reinforcing mesh welding line, also called BRC mesh welding machine, Construction mesh welding machine.
Pneumatic electrodes for welding speed Max. 100 times/min, and adjustable welding pressure for the flat welded panel.
Line wire feeding car for Pre-straighten and pre-cut wires, working faster and saving labor jobs.
Cross-wire pushing hopper with European technology, working faster and continuously.
Servo motor for mesh pulling working with Taiwan Gear rack, cross wire space more precise.
Cast water-cooling welding transformer, efficient cooling method, welding current can be adjusted by PLC.
The electrical system from the international famous brand for precise control and smooth working.
The reinforcement mesh welding machine is used to make steel rebar mesh, road mesh, building construction mesh, etc. With more-than-20years experience in design and manufacture, our BRC mesh welding machine is featured by high capacity, easy operation, and precise control.
2.Concrete mesh welding machine 3-6mm
This machine can make both panel mesh and roll mesh.Line wires are fedded from wire coils automatically and through straightening rollers. Crosswire should be pre-cut and fed by a crosswire hopper automatically.
Servo motor&planetary reducer for pulling mesh, more precise. Equipped with cutting machine to make panel mesh and rolling machine to make the rolled mesh.
3.Chicken cage mesh welding machine 2-4mm
This is our newly developed chicken cage welding machine 1200H (Pneumatic type). The welding speed can be up to a maximum of 130 times/min. It has the advantage of easier machine maintenance, fewer machine problems, easier to learn and operate, save power and consumption, less welding spark, etc.
Pneumatic welding, each welding electrode is controlled by one SMC air cylinder.Double cross wire feeders, can feed different lengths of cross wires. It is specially designed, the feeding speed is higher, can be 130pcs/min.
Electrodes 20*20*20mm can be used 6 sides.
The edge cutter is controlled by two big SMC brand air cylinders and specially designed, the cutting speed can match the welding speed.
Panasonic servo motor for pulling mesh, cross wire space can be adjusted by PLC. The pulling rack is the J&T brand, more accurate, less noise.
For accurate offer,we need to know
1.wire diameter range or usage you need to make
2.max mesh width and length
3.minimum hole size you need
4.do you need to produce mesh in roll or mesh in panel
5.your industrial voltage and frequency.
