Micromachining silicon with lasers (but no sharks)! Today we're exploring different properties and parameters involved with cutting silicon with a pulsed nanosecond laser

🥰 CONSIDER SUBSCRIBING 🥰
🔬Patreon if that's your jam: [ Ссылка ]
☕Or buy me a coffee? [ Ссылка ]

📢Twitter: [ Ссылка ]
📷Instagram: [ Ссылка ]
💻Discord: [ Ссылка ]

==== Links ====
- Photon sieve design is from: Andersen, Geoff, and Drew Tullson. "Broadband antihole photon sieve telescope." Applied optics 46.18 (2007): 3706-3708.
- Experimental watch oscillator is from: Thalmann, Etienne, et al. "Flexure pivot oscillator with intrinsically tuned isochronism." Journal of Mechanical Design 142.7 (2020): 075001.
- Big watch flexure is from: [ Ссылка ]

Some videos about nanosecond etching, cutting, drilling:
- [ Ссылка ]
- [ Ссылка ]

==== Timeline ====
0:00 Nanosecond laser
1:00 Why silicon?
1:46 Examples
2:32 Tip #1: Polished vs unpolished side
3:10 Tip #2: Focal length
4:00 Tip #3: Heat management
4:40 Confounding variables
5:23 My Best Recipe
5:43 Wobble
7:16 Cut geometry
8:12 Supported vs unsupported
8:57 How good is surface finish?
11:05 Taper in microholes
11:54 2.5D/3D engraving
12:05 Etching interference fringes and fingerprints
12:28 Metal?
12:57 Ultrafast sintering!

свернуть