The Easyrig Vario 5 with Gimbal Rig Vest and 5" Extended Arm is a body-worn support system that is adjustable to support camera rigs weighing 11 to 38 lb. The system works by using a suspension line to support the weight of the gimbal rig, taking the load off your shoulder, neck, and arm muscles, and distributing it across your torso. The tension line is adjustable by turning a screw in the back, letting you dial in the appropriate amount of tension for your rig. The system consists of the Gimbal Rig vest, a Vario 5 standard support bar, and a 5" extended support arm that has been pre-drilled for the Flowcine Serene. As the name suggests, the Gimbal Rig vest is optimized for use with motorized gimbal stabilizers, providing increased lower back support that allows you to carry weights further away from your body. A carrying bag is also included for convenient storage and transport of the Easyrig system.

The Serene is a two axis spring arm that attaches at the end of the Easyrig arm. It stabilises vibrations and motion errors on the vertical axis that comes from walking or running with the rig. It also stabilises side to side errors in the same scenarios by counter pivoting around it’s center axis. At the same time you have full use of the Easyrig cord extension that will allow you to go from high to low mode while at the same time the Serene will take care of the vertical and side to side stabilisation adding two more stabilised axis to your existing system.

INCLUDED WITH HIRE:
1x EasyRig Vario 5
1x Flowcine Serene Arm
1x Karabiner & Safety Chain
1x Velcro Side Pouch
1x Transport Bag

свернуть