💧 Watertight PLA Vases - Waterproof 3D Print - Watertight 3D Printing
🔴 Subscribe to my channel: [ Ссылка ]
🎧 My Spotify playlists: [ Ссылка ]
💰 Buy Vase 'Raindrop' 3D model on Cults3D: [ Ссылка ]
I managed to 3D print some PLA vases watertight at an average speed of 500mm/minute in vase mode. The 100% version was printed without support and only the first 5mm were filled before vase mode started. The 150% and 200% version were printed with support at the first (filled) 8mm.
⏱ Chapters:
0:09 Watertight PLA vases
1:24 Website promo ([ Ссылка ])
1:36 More videos ([ Ссылка ])
⚙ My PLA Simplify3D print settings:
- ±500mm/minute (8mm/second) (vase mode)
- hotend 185°C | bed 50°C
- 250 micron | infill 20% (first 5-8mm)
- 2 top layers | 2 bottom layers | 2 outline layers (first 5-8mm; then vase mode without top layer)
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 75%
- only support the first 5-8mm
👍 Thanks for watching the video Watertight PLA Vases - Vase Mode Settings - 3D Printing
⚠ There are affiliate links in this description. Affiliate means that when you buy something after clicking on one of these links in this description, i will receive a commission each time you buy something. By shopping through these links, you don't have any extra costs.
🌐 [ Ссылка ]
🔴 Products i use that you can buy on eBay (affiliate links)
🕛 Buy LaMetric TIME on eBay: [ Ссылка ]
♻ Buy PolyTerra™ PLA on eBay: [ Ссылка ]
⛏ Buy Modifi3D on eBay: [ Ссылка ]
📱 Buy Samsung Galaxy S10 Plus on eBay: [ Ссылка ]
🎞 Buy GoPro HERO 10 (and accessories) on eBay: [ Ссылка ]
🔴 Products i use that you can buy on AliExpress (affiliate links)
📱 Buy Samsung Galaxy S10 Plus on AliExpress: [ Ссылка ]
🕹 Buy TELESIN 80M Bluetooth Remote Control For GoPro on AliExpress: [ Ссылка ]
🏬 AliExpress (affiliate links)
🔴 Filament: [ Ссылка ]
⚙ 3D Printers: [ Ссылка ]
✂ 3D Print Tools: [ Ссылка ]
🏬 eBay (affiliate links)
🔴 Filament: [ Ссылка ]
⚙ 3D Printers: [ Ссылка ]
✂ 3D Print Tools: [ Ссылка ]
🌐 My website: [ Ссылка ]
👉 Subscribe to my channel AllVisuals4U: [ Ссылка ]
👉 All playlists of this channel: [ Ссылка ]
⚡ Subscribe to my short format channel AllVisuals4U Shorts: [ Ссылка ]
⚡ All playlists of this channel: [ Ссылка ]
#AllVisuals4U #3DParts4U #3DPrinting #Watertight #Water #Waterproof
🔈 Rich in the 80s - DivKid (YouTube Audio Library)
